Difference Between RAID 5 and RAID 10

From diff.wiki
Revision as of 12:18, 1 September 2020 by BelemMar (talk | contribs) (Created page with "RAID, or “redundant array of independent disks,” comes in different variants like RAID 0, RAID 1, RAID 5, and RAID 10. This data storage virtualization technology enables...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

RAID, or “redundant array of independent disks,” comes in different variants like RAID 0, RAID 1, RAID 5, and RAID 10. This data storage virtualization technology enables results like performance improvement and/or data redundancy. Here, we will see how RAID 5 and RAID 10 differ from each other.

RAID 5

RAID 5 is the most common secure RAID level and uses striping with parity. Because of this function, a single drive failure will not result in losing data or access to it since it allows recovery. RAID  5 does not have any mirroring or redundancy, but it does have tolerance through the parity information. While reading is fast with RAID 5, writing can be a little slower due to the need for calculation with the parity information. It is an excellent flexible system that puts together efficient storage and security along with a decent performance.

=== RAID 10

===

RAID 10 is the combination of RAID 1 and RAID 0 and is a nested or hybrid RAID configuration. It uses both mirroring and striping to combine the advantages and advantages of the two RAID levels. It is fault-tolerant - in case of failure from any of the drives, the data can be rebuilt by copying it over from the rest of the disks. Both reading and writing are fast because they are accomplished in different drives and thus can be completed in parallel.

RAID 5 RAID 10
Key feature Striping with parity Stripe of mirrors
Write A bit slower than reading due to calculations Fast
Storage Efficient storage Capacity is reduced compared to RAID levels that don’t use mirroring
Preferred when Using file and application servers with limited amount of data drives When reading and writing performance is essential and there is a need for recovery options
Advantages Less risk of losing data, fast reading and considerable writing speed Fast rebuild time, combination of RAID 0 and RAID 1
Disadvantages Complex; replacement of disks and restoring/rebuilding data can take a day or more Half of capacity for storage goes to mirroring; relatively expensive

Venn Diagram

Difference-Between-RAID-5-and-RAID-10.png